Kilflam™ 1000
A single core fire resistant cable designed for use in steel conduit. Meeting the tough requirements of BS6387 CWZ when tested in conduit. The cable is manufactured using high performance mica tapes wrapped around the conductor and insulated with thermosetting halogen free low smoke insulation. Available in Blue, Brown, Black, Grey, Green/Yellow or other as requested.
Kilflam™ 1000 Single Core Fire Resistant Cable
LPCB APPROVAL to BS 6387
Area mm² | Conductor No of strands/mm |
MICA Tape Min. Width (mm) | Conductor Resistance ohms/km @ 20°C |
Mean Insulation (mm) | Nominal cable Diameter mm |
Spark Test |
1.5 | 7/0.53 | 8mm | 12.1 | 0.70 | 3.3 | 9kV |
2.5 | 7/0.67 | 10mm | 7.41 | 0.80 | 3.75 | 11kV |
4.0 | 7/0.85 | 12mm | 4.61 | 0.80 | 4.3 | 11kV |
6.0 | 7/1.04 | 14mm | 3.08 | 0.80 | 5.0 | 11kV |
10.0 | 7/1.35 | 18mm | 1.83 | 1.00 | 6.8 | 13kV |
Fire Resistance: | Meets the requirements of IEC331 and BS 6387 C, W and Z when tested in steel Conduit |
Smoke Emission: | Complies with low smoke emissions as of BS 7211 |
Acid Gas: | Meets acid gas emissions of BSEN 50267 with an HCL level <0.5% |
Flame Retardance: | Meets BS EN 50265-2-1 |
Temperature Range: | Can operate in the range -25°C to 90°C |
Construction: | Conductor Plain annealed copper to BS 6360 class 2 Fire barrier Mica covered conductor Insulation: Low smoke zero halogen to BS7655 - EI5 |
Supplied Lengths: | 100 and 500m - other lengths available on request |
Colours: | Brown, Green/Yellow and other colours available on request |
Approvals: | LPCB Approved to BS 6387 C, W and Z when tested in metal conduit |