FumeGuard™ 3183B – 3185B, H05Z1Z1-F, Insulated & Sheathed Flexible Cords
Download Declaration of Performance (318B)3183B – 3185B, H05Z1Z1-F, Insulated & Sheathed Flexible Cords
Used as supply leads for domestic and office appliances and within light fittings. This cable is manufactured to HDZ1.14S1 and generally to BS650 table 27.
Range partly approved by BASEC.
Conductor Area mm² |
Conductor Construction |
Mean overall Diameter mm | Conductor Resistance ohms/KM @ 20°C |
|||
3182B | 3183B | 3184B | 3185B | |||
0.75 | 24/0.20 | 6.50 | 6.70 | 7.60 | 8.60 | 26.00 |
1.0 | 32/0.20 | 6.80 | 7.05 | 8.15 | 9.40 | 19.50 |
1.25 | 40/0.20 | 7.50 | 8.05 | - | - | 15.60 |
1.5 | 30/0.25 | 7.80 | 8.25 | 9.60 | 10.60 | 13.30 |
2.5 | 50/0.25 | 9.25 | 10.20 | 11.30 | - | 7.98 |
4.0 | 56/0.3 | - | 11.5 | 12.5 | - | 4.95 |
Operating Temperature: |
70°C (90°C available on request) |
Colours: | White and Black sheath. Other colours available on request |
Packaging: | 50 and 100 metres. Other lengths available on request |
These cables are intended for the same application as PVC cables but where a Low Smoke Halogen requirement is needed. |
Insulation: Made with Low Smoke Zero Halogen Thermoplastic Material (T16)
Conductor Resistance: | As per BSEN60228 |
Insulation Thickness: | As per HD21.14 S1 |
Insulation Resistance (min): | 0.02 M ohms/Km at 70°C |
Tensile Strength (min): | 7.5 N/mm² |
% Elongation (min): | 150% |
Hot Set Elongation (max): | 100% at 200°C |
Flame Test: | BS EN 60332 |
Smoke Emission: | As per BS EN 61034 |
Corrosive Acid Gas Emissions: | <0.5% to BS EN 50267 |
Voltage Test: | Pass at 2.5KV 20°C |
Sheating: Made with Low Smoke Zero Halogen Thermoset Material (TM7)
Sheath Thickness: | As per HD 21.14 S1 |
Cable OD: | As per HD 21.14 S1 |
Tensile Strength (min): | 7.5 N/mm² |
% Elongation (min): | 150% |
Voltage Test: | Pass 2.5 Kv |
Oxygen Index: | 35% at 270°C |
Corrosive Acid Gas Emissions: | < 0.5% to BS EN 50267 |
Test Under Fire Conditions: | BS EN 60332 |