Tel:+353 (0)51 421405

Basec - Quality Approved Cables
Inner Visual

FumeGuard™ 3183B – 3185B, H05Z1Z1-F, Insulated & Sheathed Flexible Cords

3183B – 3185B, H05Z1Z1-F, Insulated & Sheathed Flexible Cords

Used as supply leads for domestic and office appliances and within light fittings. This cable is manufactured to HDZ1.14S1 and generally to BS650 table 27.

Fumeguard LSHF Flexible Cable 3183B

Range partly approved by BASEC.

Conductor
Area mm²
Conductor
Construction
Mean overall Diameter mm Conductor
Resistance
ohms/KM @
20°C
3182B 3183B 3184B 3185B
0.75 24/0.20 6.50 6.70 7.60 8.60 26.00
1.0 32/0.20 6.80 7.05 8.15 9.40 19.50
1.25 40/0.20 7.50 8.05 - - 15.60
1.5 30/0.25 7.80 8.25 9.60 10.60 13.30
2.5 50/0.25 9.25 10.20 11.30 - 7.98
4.0 56/0.3 - 11.5 12.5 - 4.95

 

 

Operating Temperature:
70°C (90°C available on request)
 Colours: White and Black sheath. Other colours available on request
Packaging: 50 and 100 metres. Other lengths available on request

 

These cables are intended for the same application as PVC cables but where a Low Smoke Halogen requirement is needed.

Insulation: Made with Low Smoke Zero Halogen Thermoplastic Material (T16)

Conductor Resistance: As per BSEN60228
Insulation Thickness: As per HD21.14 S1
Insulation Resistance (min): 0.02 M ohms/Km at 70°C
Tensile Strength (min): 7.5 N/mm²
% Elongation (min): 150%
Hot Set Elongation (max): 100% at 200°C
Flame Test: BS EN 60332
Smoke Emission: As per BS EN 61034
Corrosive Acid Gas Emissions: <0.5% to BS EN 50267
Voltage Test: Pass at 2.5KV 20°C

Sheating: Made with Low Smoke Zero Halogen Thermoset Material (TM7)

Sheath Thickness: As per HD 21.14 S1
Cable OD: As per HD 21.14 S1
Tensile Strength (min): 7.5 N/mm²
% Elongation (min): 150%
Voltage Test: Pass 2.5 Kv
Oxygen Index: 35% at 270°C
Corrosive Acid Gas Emissions: < 0.5% to BS EN 50267
Test Under Fire Conditions: BS EN 60332